HAWE Check valves

Check valves block the flow rate in one direction while enabling it in the other direction. The range includes check valves, releasable check valves, pre-fill valves and line rupture protection valves.

Check valves

Check valves are a type of non-return valve. They block the oil flow in one direction and open in the opposite direction. In the closed state they have zero leakage.
Check valves type B
Check valves type RK, RB
Check valves type RC
Check valves type RE
Check valves type ER, EK
Check valves type CRK, CRB, CRH

Releasable check valves

Check valves with hydraulic release are a type of check valve. They block one or both hydraulic consumer lines or are used as a hydraulically actuated drain valve or idle circulation valve.
Releasable check valve type RHC, RHCE
Releasable check valve type HRP
Releasable check valve type RH
Releasable check valve type DRH
Releasable check valve type RHV

Pre-fill valves

Check valves and pre-fill valves are a type of non-return valve. Check valves block the oil flow in one direction and open in the other direction. Pre-fill valves are check valves with hydraulic release. They are used, e.g. in top ram presses for suction and emptying the press cylinder on rapid closing and opening.
Pre-fill valves type F

Line rupture protection valves (burst pipe protection), shuttle valves

Line rupture protection valves, also called pipe rupture protection valves are a type of check valve. The valves are normally mounted directly on the cylinder. They prevent uncontrolled cylinder movement in the event of a pipe rupture or hose break. Shuttle valves are a type of check valve. They have two inlets and one outlet. As soon as a pressure signal is present on at least one of the two inlets, an outlet signal is generated. The inlet with the higher pressure is automatically connected to the outlet. The other inlet with lower pressure is blocked by a ball (OR operator). type LB
Shuttle valve type WV and WVC